Fourstar

photobucket-9797-1343062957317.jpg
 
The truck looks awesome man! Any plans for upgrading the tranny now that you are going with the 6.0?
 
Is there any sticking out?, if so you could possibly put a notch in it with a die grinder and use a flat tip screw driver or screw bit in a socket?
 
non of it is sticking out, and it's about 1/16 of an inch inside the head, so i don't have much room to weld a nut to it, but that's what i might have to try
 
Cam and tune imo. Unless yous got the money build it and the patience of waiting longer to install in le truck lol
 
JTD said:
non of it is sticking out, and it's about 1/16 of an inch inside the head, so i don't have much room to weld a nut to it, but that's what i might have to try
Click to expand...

Drill, tap, helicoil, done. Had to do this a few times at stealership when I worked there, need to do this to my 04. Take your time, make sure you are in the center of the bolt and put a longer one in the next closest hole for a guide. When I did it I would drill a little and stop to check/lube it again, continue drilling. That or an easy out would be worth trying.
 
You must log in or register to reply here.
Top