Recent content by Liltahoe

I'm assuming it's similar. I just put the truck is the shop due to lack of time. But I'll check it out when it's done.

Due to lack of tools at my house and it's unsafe to drive on the road my buddy is picking it up tomorrow with his rollback and taking it to his shop to do the lower ball joints and wheel bearings and new dimmer switch and a few other miscellaneous things for it to pass inspection. About to be...

Okay thanks hopefully it won't take long.

Pull the steering wheel off? Im assuming after that the column parts will slide off.

Okay so my dimmer switch literally broke off. I was wondering if someone can explain how it works before I pull the column apart I see a metal rod disconnected going to the column I'm assuming that has something to do with the dimmer? Just looking for the best approach to this. Is there an...

Rigged the exhaust up it ain't pretty but its legal. Doing true duals in the summer time when its warm. Excuse the dust n the dirt haven't had a chance to clean it. In case you where wondering why the exhaust is clamped at the end it's because the welder is at the shop 40 miles away. Some...

I'll do the o2 tomorrow I'm fixing my exhaust tomorrow. Already put new plugs n wires on it. I'll go ahead and put the new fuel filter on it too but I just filled her up that's gonna be fun.

Running rich wouldn't cause a power loss really mpg lost yes but power not so much. Fuel filter may be my issue looks as if it needs to be replaced. As far as regearing Ill do that when I SAS. It just seems the truck has good dyno numbers but doesn't show it in the street. My hunting truck had a...

Okay long story short brand new 350 with 350hp brand new tranny in a 2 door Tahoe with 6 inches of lift on 33s. I went on my first long trip with the truck which was only 40 miles from my shop to my house and it struggled to get up hills it down shifted like it was supposed too but it was still...

Located in colonial heights va. N they are good trucks I prefer obs over any other model. Drove the truck home today from my dads shop no inspection sticker on it no exhaust on it. Back yard alignment with brand new ifs and steering components. It was a 40 mile ride. Let's just say she walked...

6 inch suspension with extra leaf on each side. Well this is going to be a long strung out process. But I purchased this jewel for $1000 needed a new motor new cooling system new new tranny and new suspension parts. I pulled the old 350 out threw it behind the garage it needed new heads and a...

Buying a new compressor at this time is out of the window that's why I'm looking for a way around it.

I'm obs, And have 1 belt.

Okay well my ac compressor is causing a terrible screeching sound and I was wondering how I would run the belt or eliminate the screeching. Any help would be appreciated, thanks!

Straight pipes was a quick way of getting it on the road "legally"