Search results

Do you have cats?

Here's some diagrams for GMT900 wiring harnesses: Silverado Front: Sierra Front: Silverado Rear:

I'd probably get a few different sizes, and use test leads and a couple lengths of wire right off the battery to get the voltage you want to see before cutting apart the wiring harness.

You might get lucky and be able to find it locally at a radio shack or computer repair/supply store, but they're easy to find online and you can get the size you want too.

The DRLs. As long as they're still operating as OE (i.e., they're only DRLs and you didn't turn them into signals), the way you have the resistor wired is incorrect for the application, and the resistor size is superfluous. To drop the voltage at the socket, with the current rating for the LED...

You would have to wire a resistor in series with the bulb socket to reduce voltage at the bulb though, and in such a case you'd want a resistor with a lot more resistance, like 15ohm, 1/2W. Putting the 6ohm resistor in parallel is just dissipating power in this case.

He means you didn't need resistors on the DRL circuit in the first place, since they don't blink. They're just making heat for nothing right now.

What are you doing for headlights?

'58 Plymouth Fury.

If you get a chance, can you check and tell me if the coil harnesses are separate from the rest of the engine harnesses? I want to buy just the coil harnesses, but obviously if they're bundled together with the injector harness or other wiring it won't be possible.

Cool stuff. Which heads are pictured? GM or aftermarket castings?

Comprehensive link :shakehands:

Ground Force 2/3.5

Motor wise, what's different between the WRX and the STI?

Is that pretty sustainable on a stock dmax? or do you need to build the motor to handle that? (I know next to f-all about oil burners!)

Nope, graduated a couple years ago. It was always fun to go down cause the Falls were a short drive away. anything to do in hamilton?

How much boost does it take to make that kind of power?

I bought some elite gauges too, did you connect the white wire to the interior lighting circuit? Noticed in the vid you dimmed the gauges so I assume so?

Yessir, from Ottawa. And you haven't heard of the prestigious Brock University? lol.

Welcome from the capital. I remember those snuff pics from the other place.