I really do not want to sell this truck, but I have no room at my house nor time for this truck. I bought this truck from Zero (Will Andes) back in 2011 and only added longtubes to it.
Currently the longtubes (with no cats) are installed, but I'm planning on swapping back to stock exhaust...
Hey everyone
I am not new to forums, or even nee to automobiles. Iv grown up and spent a lot of my time (and money) on cars. My grandfather used to drag race, and owned a machine shop. My father has been a mehanic his whole life as well. Its in my blood, its a passion of mine I hope to one day...
88GMCtruck's 98 Silverado Towpig Build: "Black Fox"
Since I recently joined and recognize some faces I haven't seen in years, figured I would post up some backstory of my Dually.
After looking at duramax trucks and not wanting to spend as much, I decided to go a different route. Here...
Okay guys, I bought a used 03 SS with 117K, that is in immaculate condition other than the sad fact that it is having the battery drain issue from the IPC/DIC circuit. I did my research, and a draw test and found this to be the circuit. Will rebuilding the gauge cluster as most have suggested...
Getting a new dash put in soon so all my hydrodipped pieces will be for sale.
Lot of pieces probably around 11 or so.
**only thing I'll need in return is steering wheel pieces with column pieces and AC control piece (must be knob style or else I'll just have to keep it)**
Steering wheel piece...
Time for it to go, 2008 rcsb 4.8 LT model
-4.8 with 78xxx
-LTs, ORY, 14" magnaflow to 4" tip
-TB stall
-vette servo
-air aid intake tube
-custom tune(it is unlocked)
-Tune says 3.73s but glovebox says 3.23s. Never cracked open to see. Runs round 1700-1800 rpms at 65
Interior
-black...
Ever since i bought this house, i hated the way the down stairs bathroom looked. wood panel floors, beige paint, terrible vanity...and a fucking kitchen sink faucet.
i changed out the flooring a while back and painted the beige bullshit...but still hand that fucked vanity, mirror and faucet...
So I'm going to be in the market for another nbs truck here soon, with a budget of about $7500 max. Looking at 99-07 4.8/5.3 trucks but preferably an 03-07. I'm partial to single cabs as far as looks and performance goes, but I've been told I'll hate it after driving a crew cab for so long. Any...
99-02 chevy
car
chevy
college
crew cab
dic
duramax
ecsb
friends
how to
injectors
interior
lbz
lifted
nbs
replace
sierra
silverado
steering
steering wheel
stock
transmission
truck
wheel
word
I have an 04 Silverado 2500hd 6.0 . I haven't don't anything to to the truck since I bought it last year. It currently has 145,000 miles, 10ply hankook dynapro ats and the factory shocks. It is level in the front so I'm assuming someone may have cranked the torsion bars to level it. As I stated...
For a very long time now everybody keeps asking me why I don't make a build thread. So today - I'm bored - and here it is. For those who don't know I have an 02 HD front end obsession. My two trucks are always works in progress but one I'm getting quite happy with the result. So without further...
Thinking about making a run to get some parts
03-06 steering wheel with clock spring to add steering wheel controls and doc- $150+shipping
03-06 console and dash piece- $200+ actual shipping
99-06 short overhead console- $50+ shipping
NNBS DIC panel- $50+ shipping
03-06 dash bezel...
I soldered a stepper in my buddies 03 Silverado for his trans temp gauge. works flawless. Few weeks later I tried in my 05 and it didn't work, soldered 2 different motors in and still nothing. No pictures but the solder points look good. A couple months later another friend tried in his 06 vmax...
DISCOUNTS VALID STOREWIDE!
Including the the ALL NEW SCG PRO POLISHES, SEALANT, AND PADS!
RAPID ALL-IN-ONE™ POLISH: The fastest way to a swirl free and protected shine in ONE step!
MACHINE CUT™ POLISH: Correct even the most swirled and damaged finishes, removing up to 1500...
Well, a couple months ago I got my first diesel, a 2006 Chevy 2500 Duramax HD LT. I'm absolutely loving it, and have added a few things like bumper/grille (deer are a big problem in my area), a leveling kit, tow mirrors, and completely redid the audio inside. I do have a couple questions though...
1977 chevy z28 camaro and has a 350.
help me find cheap prices/places to get the following:
-braided stainless steel spark plug wires
-ignition coil
-stock rochester carb rebuild kit
ill update the list as i get more info. i really appriciate it if anyone can lend me a hand in...
so i got a 2500 gas cluster out of an 03 or 04, no stepper motors in it or bulbs. I have stepper motors and needles for it and am planning to swap LEDs in it. trying to put this in my 05 1500 LT for the trans temp and cause my rpm stepper motor appears to be on its way out. Anyway i went to plug...
Selling my fiberglass center console, picked up a 03+ and was thinking about mounting my 99-02 denali driver info center in overhead console. If I got a 99-02 I could mount the dic in there and my EQ in the cd changer slot. Anyone smooth paint one? Is the lower dash different? <br />
<br />...
My 04 silverado 2500 w/6.0 did something funny the other day while pulling a trailer. I was pulling an 8 foot trailer with brush on it through my field and had to put it in 4 high. Well I left it idling for a few minutes while I jumped out to throw some more on the trailer and all the sudden my...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.