Cheeny23

Resident Wop
Staff member
Jan 8, 2011
6,615
336
83
Bakersfield
Does your 4in. AFE drone/resonate in the cab at any certain speeds? My 5in. does in 6th gear at the mid 60 mph mark and sometimes in 5th gear around 55mph.

Sent from my SM-G900V using Tapatalk

negative. Ive got sound deadener throughout the whole truck, but i dont have any drone whatsoever
 

BARBER

Black on Black
Mar 21, 2012
509
1
16
Owanka, SD
negative. Ive got sound deadener throughout the whole truck, but i dont have any drone whatsoever
Yea I got boxes of some Second Skin deadener I'll probably use on the back of the cab eventually. My exhaust tone may change slightly when I cut the tailpipe down and weld on my tip.

Sent from my SM-G900V using Tapatalk
 

Cheeny23

Resident Wop
Staff member
Jan 8, 2011
6,615
336
83
Bakersfield
now, i still have my OEM frontpipe on there with the cat, so once i put that delete pipe on there, it may change a bit. I'll let you know when that happens
 

Cheeny23

Resident Wop
Staff member
Jan 8, 2011
6,615
336
83
Bakersfield
Got the bed cover installed.

248189d1cace5984c7d886d8187c90d8.jpg


Sent from my SM-G900T using Tapatalk
 

Cheeny23

Resident Wop
Staff member
Jan 8, 2011
6,615
336
83
Bakersfield
I had a rollnlock on the ecsb before I traded it for the fiberglass one, I liked it, it's more secure as it physically locks into the strip on the tailgate as well. And the lock is centered and least offensive looking imo, compared to the truck covers usa, that's like a little plastic door on the right side.

Sent from my SM-G900T using Tapatalk
 

Cheeny23

Resident Wop
Staff member
Jan 8, 2011
6,615
336
83
Bakersfield
well, almost 2 years and a fuel pump/injectors later, I'm actually going to modify one of my shitwagons.. you guys may have seen the post in the money spent thread, but here's what is going down:

Proformance Diesel UCA & LCA
Cognito 4-6 turned down
Cognito Idler and Pitmen support
Kryptonite tie rods
King Coilovers for the front
King resi for the rear
2" block for rear, then Atlas leafs at a later date if needed
18" method machined standards
35" Toyo Ridge Grapplers



Travis is wating to hear back from king, so I imagine they'll be ready end of Dec/early Jan.
I'm still not 100% on the wheels, so open to suggestions there. I could stick with my denali 20s too, would look EXACTLY like the first picture below.. Not buying Forces or any shit like that.

LdVkKAr.jpg


QRLqIaI.jpg


jlBVhX4.jpg
 

Huck

BIIIIG SQRBDY GUY
Jan 27, 2011
12,335
1,389
113
Gainesville, Ga
I actually prefer the stock wheels and big tires honestly over 18” methods. That’s too small a wheel for such a big truck IMO


Sent from my iPhone using Tapatalk Pro
 
  • Like
Reactions: Connor and Dakota

Cheeny23

Resident Wop
Staff member
Jan 8, 2011
6,615
336
83
Bakersfield
I actually prefer the stock wheels and big tires honestly over 18” methods. That’s too small a wheel for such a big truck IMO


Sent from my iPhone using Tapatalk Pro
Truck came with 18s, they're still sitting behind my shop lol. And method doesn't make them in 8x180 in a 20inch.

Sent from my ONEPLUS A5000 using Tapatalk
 
  • Like
Reactions: DeanH1290

Huck

BIIIIG SQRBDY GUY
Jan 27, 2011
12,335
1,389
113
Gainesville, Ga
Truck came with 18s, they're still sitting behind my shop lol. And method doesn't make them in 8x180 in a 20inch.

Sent from my ONEPLUS A5000 using Tapatalk

Ahhh ok. I still vote some kind of 20, at least eventually


Sent from my iPhone using Tapatalk Pro
 

SamCarroll

Faux Runner
Staff member
Jan 25, 2011
7,740
1,981
113
Northern California
well, almost 2 years and a fuel pump/injectors later, I'm actually going to modify one of my shitwagons.. you guys may have seen the post in the money spent thread, but here's what is going down:

Proformance Diesel UCA & LCA
Cognito 4-6 turned down
Cognito Idler and Pitmen support
Kryptonite tie rods
King Coilovers for the front
King resi for the rear
2" block for rear, then Atlas leafs at a later date if needed
18" method machined standards
35" Toyo Ridge Grapplers



Travis is wating to hear back from king, so I imagine they'll be ready end of Dec/early Jan.
I'm still not 100% on the wheels, so open to suggestions there. I could stick with my denali 20s too, would look EXACTLY like the first picture below.. Not buying Forces or any shit like that.

LdVkKAr.jpg


QRLqIaI.jpg


jlBVhX4.jpg
:skeet:

and i vote
1578.jpg