How To Clear NNBS Headlights

Status
Not open for further replies.
Jose.

Jose.

Loves tacos
Mar 11, 2012
1,043
0
0
Runaway Bay (N.TX)
krusn64

krusn64

Member
Apr 9, 2012
95
0
6
34
San Diego, CA
www.facebook.com
i have a question maybe someone will have an answer to...I did this a few months ago following these videos and another on youtube. The tab that the guy says, "do not cut this off" i cut off and kept it just in case but i dont see the importance in it.

Tip: when resealing, apply silicone liberally around the edge. let it dry overnight and when you look at the lights the next day, look very closely at the seal. if anything looks like it might not be completely sealed, go ahead and add a little more silicone. I had zero problems with my lights fogging up because i took the time to make sure my lights were sealed 100%
 
Smith

Smith

Super Moderator
Staff member
Jan 28, 2011
7,167
398
83
Louisiana
I'm not sure if anyone on here does or not but fastw6TA (Phil) on another site has a website where he does them. Good guy to deal with from what I hear. He made the original videos. Ill see if I can find his site...

Edit: here is his site if you can't get anyone on here to do it...
https://sites.google.com/site/fastheadlights/
 
Last edited:
CHAGO

CHAGO

Member
Mar 10, 2011
655
3
18
Spring (Houston), TX
Smith said:
I'm not sure if anyone on here does or not but fastw6TA (Phil) on another site has a website where he does them. Good guy to deal with from what I hear. He made the original videos. Ill see if I can find his site...

Edit: here is his site if you can't get anyone on here to do it...
https://sites.google.com/site/fastheadlights/
Click to expand...

My headlights were done by Phil.. A+ guy there.. no leaking or hazing up
530872_509421449068719_652113537_n.jpg
 
Last edited:
Status
Not open for further replies.
Top Bottom