99-02 PW/PL Switch Wiring Question
- Thread starter Khaos
- Start date
Did some more looking now that I have the switch apart.
This is the pinout I found
And db link for full size https://www.dropbox.com/s/j29wl92o3...itch - Driver - C1 (Except 4 - Door).pdf?dl=0
So, compared to my cutout wiring of this:
Which is wired like this:
Any thoughts?
I'm thinking that on my switch,
Both grounds G and H will be tied together
F is positive and where I get power from
Both A and B will be tied together for "Up"
Both C and M will be tied together for "Down"
That leaves me with D, which I'm confused about. Any input?
This is the pinout I found
And db link for full size https://www.dropbox.com/s/j29wl92o3...itch - Driver - C1 (Except 4 - Door).pdf?dl=0
So, compared to my cutout wiring of this:
Which is wired like this:
Any thoughts?
I'm thinking that on my switch,
Both grounds G and H will be tied together
F is positive and where I get power from
Both A and B will be tied together for "Up"
Both C and M will be tied together for "Down"
That leaves me with D, which I'm confused about. Any input?
Need crew cab switch pinout imo
EDIT:
Y not wire it up to power and ground and hook a voltmeter up to the wires?
EDIT:
Y not wire it up to power and ground and hook a voltmeter up to the wires?
Last edited:
I'm just trying it on my ext cab switches I have at the house right now.
But here's the cc pinouts
https://www.dropbox.com/s/jx87omgpny29s0m/Window_Door Lock Switch - Driver - C1 (4-Door).pdf?dl=0
https://www.dropbox.com/s/dfhuupzdcfgz0zr/Window_Door Lock Switch - Driver - C2 (4-Door).pdf?dl=0
But here's the cc pinouts
https://www.dropbox.com/s/jx87omgpny29s0m/Window_Door Lock Switch - Driver - C1 (4-Door).pdf?dl=0
https://www.dropbox.com/s/dfhuupzdcfgz0zr/Window_Door Lock Switch - Driver - C2 (4-Door).pdf?dl=0
My question is, is power A and M the up and down, or B and C the "signal"
Edit:
F: RAP fuse supply voltage is power I assume.
Last edited:
I see power door panels on eBay all the time for cheap. Make this work and I might have to follow suit lol
I'm just trying to use the switches for something else besides windows lol.
There's a few writeups on using these panels and wiring. I'll make a how to because all the pics from those aren't around anymore.
This is where I'm at, need help figuring out what "D-Lockout Signal" does, because I think I need that in order to make this work
hook up the ground and power as you show then test a wires for results, if none of them do anything try grounding D, if they still don't do anything try applying power to D. if all else fails rip the switch apart and investigateThis is where I'm at, need help figuring out what "D-Lockout Signal" does, because I think I need that in order to make this work
I had the brilliant idea of just hooking shit up and playing musical wires for a bit and I fucking figured it out!
Ill post pics and wiring in a bit, now to order a cc switch and get this install party going.
Ill post pics and wiring in a bit, now to order a cc switch and get this install party going.
:rofl: imo, but at least I'll have a good idea of where to start and should be much quicker lol. My main concern was if it would actually work or not.
This is where I'm at, need help figuring out what "D-Lockout Signal" does, because I think I need that in order to make this work
Lock out signal is for the window lock switch that way the passenger can't roll their window up and down.
Sent from the 4.hate using tapaturd
Ah, I see. Well I just grounded that and it worked. I'll draw up a nice diagram for anyone that wants to do the same thing.
That seems like I've heard that before somewhere..........
But you already haz crew cab. :think:
