I finally bought a car - time to start working on it

Sounds good dude! Open headers correct? What exhaust are ya gonna be running eventually?

Edit: should have read, yes, open headers.

You tuning it or getting it done by someone?
 
barrrf said:
Im tuning. Havent had much time to dick with it since I got it started. Also didnt have any coolant or hoses or any of that mildly important stuff hooked up either so I couldnt idle for too long.

Not sure on exhaust. Im going to try the current mufflers and I cant remember what they were now. I didnt love them with the big block so they'll probably still suck. Maybe I'll just run open 3" :hmm:

nah.
Click to expand...

Ah I see. Kinda need all that to let it idle more than a few minutes. But hey, it started and idled, so that's a win.

Open 3" sounds great, but not all the time. Cutouts will be your friend.
 
Khaos said:
Ah I see. Kinda need all that to let it idle more than a few minutes. But hey, it started and idled, so that's a win.

Open 3" sounds great, but not all the time. Cutouts will be your friend.
Click to expand...

Yes I know. Im not seriously going to run open headers all the time.
 
  • Like
Reactions: Khaos
That 80e first gear sure is a slouch. Gear down and you'll be very pleased. What are you gearing it to?

Glad to hear you got the tune pretty well sorted. Did it all yourself correct? That's one area I've yet to venture into.
 
barrrf said:
Starting with 3.73. From 3.31 I should be smiling. If Im not then fuck this car Im driving it off a goddamn cliff.

Installing wb02 as well so I can verify AFR.

Ive also got a miss happening while cruising in any gear. Not sure how Im going to fkn diagnose that. Im leaning towards bad coil(s). Theyre pretty much the only thing thats not brand new on this fkn motor. I have a thermal cam here at work Im going to borrow to see if I can find anything unusual.
Click to expand...
Shoulda gone 4.10. 3.31 to 3.73 is not a huge change. Also, check grounds. We chased a miss on a buddies truck for soooooo long and it turns out one of his grounds was just like 1/2 turn loose.
 
Huck said:
Shoulda gone 4.10. 3.31 to 3.73 is not a huge change. Also, check grounds. We chased a miss on a buddies truck for soooooo long and it turns out one of his grounds was just like 1/2 turn loose.
Click to expand...

10-4. Thanks.

If I dont like 3.73, I'll go to 4:10. But Im only running a 26" tire and I would like to retain some cruisability.
 
I need a stall and gears in mine. But of course I can’t replace just the gears in mine I gotta get a different rear end
 
yates said:
Elaborate please.
Click to expand...


With my cam they recommend a 3200 stall minimum. And the gears in my caddy are 2.94. And of course for some reason you can’t replace the gears in the caddy so everyone just replaces the whole rear end
 
barrrf said:
10-4. Thanks.

If I dont like 3.73, I'll go to 4:10. But Im only running a 26" tire and I would like to retain some cruisability.
Click to expand...

Ahh, wasn’t thinking about tire size too. But still. I just know ever since I had my Cobra with 4.10s and a 26” tire, I will never fear the gear again lol


Sent from my iPhone using Tapatalk Pro
 
Runs great! Still open headers basically?

Now that you've done that once, wot is gonna be a more frequent thing for you lol. At least that's how it is with me.
 
You must log in or register to reply here.
Top Bottom
Back