Justinghump's '02 RCLB Build Thread

I need to learn how to multi-quote...do you have pics of your Longbed?

multiquote is to click the little quote box on the bottom right of the post, on each post, then your last one your quoting use the reply with quote.

and mines a OBS so its a little different, and i dont have any pics that make it look long, i took them all so it looked like a short bed lol
 
Fuck that. I love a slammed long bed. Do that shit and it shall be called "U.S.S Longashell"

Sent from my SAMSUNG-SGH-I747 using Tapatalk

Right on! I've always liked the C10 and OBS slammed longbeds I've seen, and I haven't really found any NBS, besides it's what I have to work with.

welcome. #3 bc :patriot:

Damn Straight.

:happeh:

Thanks man! I have a lot of plans for it, just have to let the wallet catch up :laugh:

You're welcome. & That's for sure, especially when you're in school.

lower it. fuck em' looks good man!

I'm going to work at it, really just need to figure out what I'm going to use for the back end now. & I really appreciate it :happy:

multiquote is to click the little quote box on the bottom right of the post, on each post, then your last one your quoting use the reply with quote.

and mines a OBS so its a little different, and i dont have any pics that make it look long, i took them all so it looked like a short bed lol

Gotcha, do you still have it? Thanks for the lesson, I feel less like a n00b.
 
Now that I'm home from school for the summer I decided to tackle a few of the not so fun & some of the fun projects that I've been waiting to do. So far it's been an adventure, including several trips to the stealership and several days without my ride. However I have a good parts guy who hooks me up with wholesale prices and then discounts. :mirinme:
-Replace motor mounts (passenger side broken)
-Install my OEM Trans Cooler
-Replace Oil pan Gasket
-Replace knock sensors, harness & all of the accompanying intake & throttle body gaskets blah blah blah...
-new Delco Iridium plugs
-Figure out why I have no E-Brake function
-Hopefully candy Tails & paint Lower valence black

I started with the knock sensors. Pulled the intake manifold and found this



Shopvac'd the hell out of it and then cleaned and taped the heads



Here's the culprit of that awful CEL. :clarksonbird: From R to L New, Old sensor (front) & rear sensor.



Back in with new harness and some RTV.



Did a quick hand polish to the inside of the throttle body while waiting on parts from GM after cleaning the damn oil residue out. It was black.




Feeling like a sir for doing this in only about two hours, torquing my intake manifold back down, the first bolt snaps. :tableflip: I had the of panic thinking it was broken off inside the head, however it wasn't & I just had to wait three days for new bolts.

Waiting on the new bolts I hit up the local flea market and scored this for 10 bucks.



New vs old broken motor mount.



Dropped the Oil pan to replace the gasket which, as I discovered, was riveted in by the factory.

Before cleaning



After cleaning



While I had the Crossmember dropped & the motor mounts out I ran the new hardlines for the cooler and bolted it down. DNFW cooked transmission that I just has rebuilt.



As of right now everything is reassembled, new plugs are in and the truck is running, well, tomorrow I'll put the crossmember back (I beadbalsted and painted it) and the front end back on.
 
That's exactly what happened to me with the intake bolts. So after that I said fuck it. No torque spec just tight with a socket and it worked fine. Runs good with no cel


Sent from my potato
 
Time for another update, Haven't done a whole lot, but I did knock a few things off the list.
-CM'd esky handles
-CM'd Tailgate handle (because I ball hard)
-Chrome Cap Mirrors
-Glowshift Trans Temp Guage next to A/C controls (#becauseracetrok)
-Cleared Headlights and Parking lights
-Bought New lower valence but not painted/installed
-Water Pump & thermostat
-Power Steering Pump
-'14 Silverado Aluminium 20x9's to impress the ladies...
-275/55/R20 Toyo Open Country H/Ts



Thank you Amazon.



Trying to be fly.



Sketchy Craigslist Deal :secret:



*check out that working engine bay light* installing new lights



Test Fit in Pops garage



Am I cool yet?



Longbed FTW



Dat Bumpergap.
 
I haven't posted anything on here in a while, I've just been creeping. But, if any of you follow me on Instagram, my 4l60 took yet another shit about 9 months ago, so I went car shopping while the truck was in the shop. Turned out the TC had a split in the casing which is what caused it to dump all of its fluid at an intersection in Tallahassee. I was dailying my grandfathers old civic (at least it was a 5 speed) and ended up test driving a 2010 STI that was traded at the local BMW dealer. Three days later, I had acquired my first boosted car. I guess you guys call them Turbocharged Rice Cookers, Khaos? Anyway here's pics

IMG_0631_zpscs6rsscn.jpg
[/URL]

IMG_0165_zpsgfskihsd.jpg
[/URL]

Truck is still around, new low profile Black Powder Coated ToolBox, Painted the lower Valence black, new brake rotors, new coolant tank , and replaced the intermediate Steering shaft.
 
Nah, just the axle back, intake, and accessport. I'd like to do full turbo back, protune, and then work on handling some time this year I think.

Any plans for yours?
 
Nah, just the axle back, intake, and accessport. I'd like to do full turbo back, protune, and then work on handling some time this year I think.

Any plans for yours?

You worked fast! & future plans sound good to me. I would like to get a downpipe and Acessport first, and eventually am looking to end up similar to what you described. However, on a recent trip to NC with le gf, I was sideswiped on I-77 wrecking the front fender and then on the way home, the driver rear tire (Basically new GoodYear Eagle Sports that came on the car) shredded. So damage control first...
 
Damn man, sorry to hear that. Insurance covering it?

And I got the AP and intake locally from a friend for cheap so it wasn't a large investment on my part.