Nnbs rcsb build thread

Adamcoker08

Adamcoker08

New member
Aug 11, 2014
25
0
0
54
Hey guys figured I would finally make a build thread of my truck.

90c7a6a0707cc0e6aa00af95e4650536.jpg

This was the first pic I took of my truck, 20" chrome ltz's, 20% tint 6k hid highs and lows and led tails.

Did a few mods next lowering the back 1.25" then lifted the front a total of 3" traded the ltz's for a set of 24" u255s, and sprayed the plastics.
0b628c261089540670a2d658b981d6b9.jpg


Then decided it was time to completely change the look, bought a set of 20x12 moto metal 962s with 35x12.50 toyo mts
1bfd63f264c8af524eda319c61018788.jpg


Got the 7.5" rcx lift installed

84908db4fe00572e8f00cda561855453.jpg


Went with a 2" lift block in the rear

420ca2d39f9e971daee9ae08b537f579.jpg


Eventually grew out of all the lean and installed the 6" lift blocks.

5273ba515e19d8472fa23097c71feadb.jpg


Recently got rid of the 35" toyos and went with a set of 305/55/20 nitto trail grapplers.

1cc8dccc3bbb6e1017975b67b583d504.jpg


77aa8fe206436f5f994c1c64705cbb16.jpg


Have a powder coated chrome rear differential cover on the way as long as wheel spacers for the rear.

Let me know what y'all think comments are appreciated! Thanks!






Sent from my iPhone using Tapatalk
 
I'm glad you finally grew out of the lean scene lol it looks much better with the 6in block. Very clean build though i wouldnt change a thing
 
I appreciate it guys! I just installed the rear wheel spacers lmk what y'all think

8963d73dcaa8c168f4fc01664b6e3a54.jpg


10cc811fdc5d99b74279efb12a9b82c8.jpg



Sent from my iPhone using Tapatalk
 
white/chrome makes me :skeet: I'd go with a little less lean though personally. Looks great nonetheless!
 
i don't like the tailgate handle but that being said its a super nice truck man i like the stance
 
Wrapped my ac controls in some vinyl, took me about 2 hours but well worth it!

3e42ae03c93720224ea0b533641b6e86.jpg


Also wrapped the dash kit as well!

947a636dc8907029d6d7f3f0912affaa.jpg



Sent from my iPhone using Tapatalk
 
That looks great, very close to what I'm going for but mines black. How bad was the rub with the x12s and durty fives? I'm going to be getting x12s next with my 295/60/20 (34") so hoping I can clear them.
 
With the 35s, I had to knick a little piece off the bumper caps as well as zip tie the inner fender plastic, but it was extremely bad when trying to back up, actually had to take a hammer and beat back metal so I could turn. With knowing how much cutting and work was involved I would defiantly went with 33s from the start.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Top Bottom
Back