cars

  1. dszx13

    Starter kit.

    Looking for recommendations on what I should get to fix my horrible paint an to keep it nice. I do not have a machine but I would like to get one. Looking for the best bang for my buck. I basically have the basic cheap soap from the auto parts store and rags. Sent from my SM-G935V using Tapatalk
  2. R

    New member!

    Hi everyone i'm a new member from south florida ,glad to be here.
  3. N

    2016 L83 5.3, 6L80E, & rearend (+harness, computer, and pedal)

    Bought this for one of my father in law's project cars but it looks like he may have found a different motor for it. Was said to have 8k miles on it, and looks almost new. Asking $4000 for the motor, trans, rear end, and computer/harness/pedal.
  4. iceman71

    Race Trucks

    OK, who on here drag races their Silverado??????
  5. 04SSHD

    adding another GM coupe to the fleet...Say hello to Coupe DeVille

    I went and put a deposit on something I've wanted for quite some time now. As soon as I can finalize transport arrangements this will be sitting in my driveway. 1962 Cadillac Coupe DeVille. It's not perfect, need paint again, and a little interior help. But it runs and drives amazing, all...
  6. Blackout

    Gmt800 rare/uncommon color options

    What are some of the uncommon or down right rare color options for the gmt800 trucks out there? Pics? I know there were some oddball greens and blues, ran across this the other day and it got me thinking..I know it's probably not factory but I'd like to see some of the rarer colors.. Sent...
  7. Jared

    can someone do a chop for me?

    looking to get a set of SS sedan wheels chopped onto my car Chevy SS wheels on my G8 - Pontiac G8 Forum: G8 Forums - G8Board.com if you need additional photos let me know and I can snap them
  8. JennaBear

    Black Bear Performance Whippled 2015 Chevy SS

    Since some folks might be interested in what the LS3s are performance at. Finally decided to go with the Whipple for the Chevy SS. So off to the shop she goes: On the Mainline hub dyno for stock vs AirAid vs Whipple numbers: - - - - - - - - - -auto merged double post- - - - - - - - -...
  9. P

    New Guy -Non Fullsize- Build thread lol

    New guy here posted a Hey what's up thread now I figured I would post a build thread. Not a full size so idk how much interest this will drum up so we will see :laugh: Bought my blazer December 1st 2014 after selling my bodied 03 S10, my 2000 Xtreme S10 and retiring my beat up 93 S10 ( See a...
  10. Slow05CC

    How Much Power Are You Pushing On NNBS FlexFuel Injectors

    I recently purchased a set of the FlexFuel Injectors PT#12580426 which I have read are about 36 pounders? I ordered the Racetronix EV1 Mini Delphi to EV6 USCAR adapters and plan on putting them in this weekend and getting a retune done. I know these injectors are more then I will need...
  11. slonlow2000

    Is it possible to run a sway bar with basic front bag system?

    I picked up this truck at the end of last year. Been poking around fixing what I can, and keep coming back to the sway bar. Its running drop spindles and cups in the front. The bolts for the original sway bar hold down are still in the frame rails. I'd like to get a sway bar back in...
  12. 0

    lonestar throwdown 2016 *pics

  13. TwistedWrangler

    Long time listener first time caller!

    Hello! I have read pages and pages of threads to the point where I am more confused than before I started. Here is what I have and want to do. 2005 Silverado 1500 crew cad 2 wd with 1 piece aluminum drive shaft. I have decided to go with the Mcgaughys 5/7 drop and run a 22x9's wrapped with...
  14. 2

    Surf City Garage Clayzilla

    So last week I placed an order with SCG and was asked if I could provide a review if I was provided a product. I gladly accepted and was able to use it this weekend on a 2016 Mustang I detailed. Wont go into details as to wat/how this thing is or works but its supposed to be a replacement for...
  15. C

    New to the forum but not new to GM

    Hi everyone, my name is Michael. I am new to the forum, but not new to GM cars. I've been working on maintenance and modifications of GM cars and trucks for quite a long time. Hopefully will share my knowledge and find out stuff I didn't know. Currently work at CARiD as a tech expert. I will...
  16. S

    new guy

    Hey everyone I am not new to forums, or even nee to automobiles. Iv grown up and spent a lot of my time (and money) on cars. My grandfather used to drag race, and owned a machine shop. My father has been a mehanic his whole life as well. Its in my blood, its a passion of mine I hope to one day...
  17. WhiteMike

    WhiteMike's 90 Hoopty Rcsb Build

    What's better than one OBS? Two, of course! Truck is a 1990 GMC Sierra SLE, single cab, short bed, 5.7L 350 Truck belonged to my girlfriend's late grandfather, who used it to haul things across his yard, drove it back and forth to church, and drove it to the gas station for snacks. That's it...
  18. Fiesty

    Fiesty's 2008 G8 GT

    Welp I'm no longer pulling a trailer daily so I sold the ol dmax about a month ago and picked this up. 2008 Pontiac G8 GT, 72k, L76, 6 speed auto, sun roof (always wanted one), loaded, etc. Sold the dmax for $1k more than I paid for it, and got this for $16k which is a pretty good price for this...
  19. B

    Older I get

    The shittier the cars i buy lol This should be fun
  20. SamCarroll

    Quick detail on an 88 Park Avenue

    My friend picked this up from his friends grandma for incredibly cheap so he wanted me to clean it up and seal it for the winter and protect the interior for his kids. This thing was pretty clean before so the before/afters arent that insane. I did the engine too because it was pretty dirty...