Well anyone that follows any of my other crap knows I ended up selling my Audi RS5 and traded in my FX2 and picked up this 2017 GMC Denali Ultimate.
Anyone wondering what an ultimate is it is GMC's way of saying Denali with every option offered.
Picked it up from good ole Jimmy Skrait Pipes as...
so injectors on the duramax are done and i am doing a bunch of other performance mods to make a race/daily truck.
any who since the truck will be torn apart i needed a new daily.
found this truck.
its a 1999 regular cab short box silverado 4x4 4.3 v6 manual.
has around 220,000km...
So I've pretty much been stuck with adams and SCG so I want to try something new. With so much on the market the info is just overwhelming. So like the title says what pads and polishes are you using? Tool is a flex 3401. I've read that the LC hybrid pads are the best combination with the flex.
For sale: 2006 silverado
215xxx miles. If you're waiting for it lets just get this out the way, that is the downside of this truck it has high miles. Located in Maryland but this truck is from texas. No typical chevy rust, has only been in rust belt since 2013 and I do take care of it.
5/8...
In the end, I've decided to keep my truck and start gathering parts to procharge next year. My intentions are to have a reliable daily driver running on pump gas that can really get down when I want it to at the strip one weekend and go to the sand dunes the next. I want to stay as economical...
2500hd
4l80e
6.0
black
boost
build
cam
change
custom
flex
fuel
heads
injectors
monster
of
post
racing
stock
suggestions
swap
the
transmission
truck
tune
upgrade
I picked up some low mileage ( 58,000 to be exact ) 243s off a Z06 this weekend and I had a quick question about milling them before I run them over to Texas Speed & Performance for some head work.
I have been told that milling them .030 will retain the factory compression with the 5.3 dished...
Sorry if I posted this in the wrong place, but I have a tbss intake I'm gunna put on my 5.3 and I wanted to know what kind of options are out there for the tbss cover? Does a newer Silverado cover fit? I'm just not a huge fan of covering the whole motor, I like to see what's under there and I...
I have a DA that I use to wax fiberglass boat topsides in the summer. I use a wool pad for that, and I think it came with two foam pads, I have no idea what they are or do.
For compounding and polishing my SUV, what pads do I need, and what compounds and polishes would be good for a beginner...
Some of you know I bought a LS1 long block and was looking at rebuilding it for my 2005 Silvy CCSB. After doing some reading and research I decided to get rid of it. I traded the block and crank for a 2002 5.3 block and crank, so I still have all the LS1 pistons and stuff.
I have built many...
Had this customer come and ask for an exterior only detail because hes selling it. We kept getting pushed back because of the weather but we finally had a nice sunny day. This thing was as expected for a 97 and for a used land cruiser. Interior looks like it rolled off the showroom, just normal...
Hi everyone
I was wondering if anyone knows what the difference in vin code z and t engines are?The z is out of a flex fuel 2003 suburban and I'd like to swap it into my 2003 Avalanche. Wasn't sure if the heads are different or anything else.
Thanks for any info!!
Mike
This truck came in for a quick polish/seal exterior only detail. Below are the pics in order. Its hard to photograph Silver Birch through the changes of the paint but i can say it made a large difference in the depth and overall appearance of the paint. Its also now protected for daily driver...
Whelp, here it is. It's already built but still adding a few things here and there with some new changes coming soon.
I bought the truck 3 years ago Memorial Day absolutely stock with no plans to keep it that way. I can't leave shit alone. Anything.
So here's the mod list as it sits now...
This customer wanted me to polish his paint and get the most defects out as i could as he was putting an exo-cage on this coming week. I honestly have never seen paint as hammered as this. There were tons of trail rash as you can see in the pictures. Lots of deep scratches with a lot of thin...
Morn, did a 2015 ZL-1 a couple weeks back. Spent 20 hours on the polish side. It looked about 85% better when it was finished. I have never seen a dealership essentially murder a factory paint job like that ever in my life. There are some deep scratches and other things (dealer installed)...
Finally got my hands on a friends Scion tC. Its quite haggard as you can see in the before photos. Water stains all over, never washed and just overall neglected. So i went and fixed that. He was going for 60-70% correction and I exceeded that. Im really happy with how this turned out and think...
I have an 04 Silverado 2500hd 6.0 . I haven't don't anything to to the truck since I bought it last year. It currently has 145,000 miles, 10ply hankook dynapro ats and the factory shocks. It is level in the front so I'm assuming someone may have cranked the torsion bars to level it. As I stated...
Need input on if I need to change out the fuel lines and return line regulator. I have a 2010 Sierra it came stock with a 4.8l flex fuel, I upgraded to the 430hp ls3 and changed the fuel pump to walbro 450, I'm running 60# injectors and a procharger supercharger D1-sc1 with 10# of boost. Motor...
IT'S THE ONE YOU'VE BEEN WAITING FOR - ADAM'S 2014 BLACK FRIDAY SALE!!
15% OFF WITH THE CODE BF14 / FREE SHIPPING ON ORDERS OVER $149
PLUS A FREE TOTAL INTERIOR WHEN YOU SPEND $95 OR MORE
THE FLEX IS BACK! You asked, so we responded. You spoke loud and we pride ourselves on...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.