BigBoi

Well-Known Member
Mar 14, 2012
12,991
1,375
113
St George SC
Instead of posting tid bits here and there, I'll make a thread.

2015 Colorado LT ext cab
2wd

Day I brought it home
ac89840dd659dd861e8d2d531e746676.jpg


After tint, valence removal, and 2" AutoSprings leveling kit
2b56e4ab289e80abbc00f43b550db3dc.jpg
d64958f1174449cecb05d33a00e8c011.jpg


And how she sits now after debadging
7aaacb3cc6d65b96887984503079c35b.jpg


In the middle of fixing some issues.

Did get the hood flutter fixed. For those wondering, take a 13mm wrench, loosen the two hood latch bolts, lightly tap the latch assembly down about 1/4", then tighten the two bolts back. Readjust your hood bumper stop things to where there's no play, but not too high to where it bends the hood or to where the hood won't latch. Took about 5 tries to get it perfect. It's a fairly common problem among the new Colorados.

Plans ahead;
• adding two SA-12s to the factory HU
• 265/70R17 ATs
• color match the grille
 

GeoffSFAs10

Well-Known Member
May 7, 2012
1,839
64
48
St. Louis, MO
Looks good. Seems like quality with these trucks is mostly hit with some misses. hood flutter is a common one, but seems that it happens on the colorados more then the canyons??? Anyway, i will watch this, i want to get one in a couple years here.
 

BigBoi

Well-Known Member
Mar 14, 2012
12,991
1,375
113
St George SC
Yea everyone I've seen have the issue has a Colorado. It just wasn't adjusted properly from the factory. Only does it 85mph+. Some people's hoods are flexing and fluttering and they're having to take the truck to the dealer and the dealer injects a hardening foam into all the holes into the space between the two hood panels to strengthen it.

Mine was minor enough to where it just had slack in the latch.
 
Last edited:

BigBoi

Well-Known Member
Mar 14, 2012
12,991
1,375
113
St George SC
One day. Truck taxes are due next month and I gotta take a trip to Nashville for 4th. So it'll be after then.
 

BigBoi

Well-Known Member
Mar 14, 2012
12,991
1,375
113
St George SC
All the lines are kinda jacked. The lower body line that does through the door is at an angle that always makes the truck look like it has rake. My fender measurements are like 1/8" different but it still looks like I'm riding around like a dickhead. Truck would look a million times better without the line.