bagged00

Active Member
Mar 21, 2012
1,096
25
38
35
ea30f42ff640fdb146e0236fbbb865f3.jpg


Review on these street edge spindles in a few days

Sent from my SM-N920V using Tapatalk
 

bagged00

Active Member
Mar 21, 2012
1,096
25
38
35
Bumpsteer feels really nice. I do have excessive camber after alignment. Hard to tell if it's because of torsion bars or spindles thpugh. I have my bars turned all the way down
 

gmrcsb

New Member
Jul 29, 2016
2
0
0
40
How much steering radius did you loose? Noticeable?

Bumpsteer feels really nice. I do have excessive camber after alignment. Hard to tell if it's because of torsion bars or spindles thpugh. I have my bars turned all the way down
 

powertouring

New Member
Aug 27, 2016
14
9
3
40
Put some 2015 Tahoe LTZ wheels with 275/45/20 Pirelli tires. I haven't seen these rims on a NBS yet so I thought I'd share.

Getting ready to lower it 3/6 with street edge spindles and groundforce 1.3" springs and a flip kit. Belltech SP shocks and swaybars. All sitting in the garage hopefully it will look good!

d42948bee83f53b5e88733998f821d16.jpg


f1ee7beacf3a162224f30d6da2307771.jpg


And yeah I'm kinda into GM trucks I guess. Denali XL, RCSB, and Tahoe with bi-fuel CNG Kit.

176c4a516bcc1146b205c2ae2e4eeb33.jpg
 
Last edited:

Dakota

Dat Static 4wd
Mar 12, 2012
15,997
1,041
113
texarkana
Looks good man. I love those wheels. What kind of handles are those?! They look like c5 handles, maybe? I dig it!

Sent from my SAMSUNG-SM-G935A using Tapatalk
 

powertouring

New Member
Aug 27, 2016
14
9
3
40
Looks good man. I love those wheels. What kind of handles are those?! They look like c5 handles, maybe? I dig it!

Sent from my SAMSUNG-SM-G935A using Tapatalk

Good eye. They are C5 handles! Also has an HD front in it.


Sent from my iPhone using Tapatalk
 

TwistedWrangler

Active Member
Feb 24, 2016
246
44
28
Terrible Haute, IN
Anyone have a part number for crew cab upper ball joints? I have gone through 2 value craft and 2 duralast on one side. The rubber tears as soon as I start to press them in.

Sent from my SM-G900V using Tapatalk
 

powertouring

New Member
Aug 27, 2016
14
9
3
40
Got the rear done. I'll have to get the front done next! Anything wider than 275's would be rubbing bad! Glad I didn't get the 295's I had originally planned on.

e80a22de0b99da2d4d83754cd0d56e66.jpg



Sent from my iPhone using Tapatalk
 

powertouring

New Member
Aug 27, 2016
14
9
3
40
Anyone have a part number for crew cab upper ball joints? I have gone through 2 value craft and 2 duralast on one side. The rubber tears as soon as I start to press them in.

Sent from my SM-G900V using Tapatalk

I like these Moog's (Amazon link below). Dust boot is much smaller and a way better design than Autozone stuff. This was Moog's new design and look much better than the ones before.

http://amzn.to/2caAaXV


Sent from my iPhone using Tapatalk
 

TwistedWrangler

Active Member
Feb 24, 2016
246
44
28
Terrible Haute, IN
I almost did the moogs. Didn't want to spend the extra. The ones I got didn't have the boot on them so they went in easy then installed the boot. All had lifetime warranty. Probably replace in a year.

Sent from my SM-G900V using Tapatalk
 

TwistedWrangler

Active Member
Feb 24, 2016
246
44
28
Terrible Haute, IN
I know I'm gonna hear "told ya so" but anyway. 1/2 coil cut equals 1"? Now that the 2" springs are in front I want an inch or so more and I want both sides to sit equal. So I figured cut drivers side to 3" drop and try to get passenger side as close to equal as possible then set the rear at 5" since the McG flip kit will go 4,5 or 6.

Sent from my SM-G900V using Tapatalk
 

Dakota

Dat Static 4wd
Mar 12, 2012
15,997
1,041
113
texarkana
Got the rear done. I'll have to get the front done next! Anything wider than 275's would be rubbing bad! Glad I didn't get the 295's I had originally planned on.

e80a22de0b99da2d4d83754cd0d56e66.jpg



Sent from my iPhone using Tapatalk
Looks good. We need more pictures of this thing. I looove the handles.

Sent from my SAMSUNG-SM-G935A using Tapatalk