GreyGhostz71

Jimmy Skrait Perrps
Mar 27, 2012
2,281
13
38
You want to know what size tire you can fit on your X model year truck, with what options what lift etc, post it in here.

You want to know if 285's will fit on your stock wheels, ask in here.

You want to know if 37's will fit with only minor trimming and a body lift, ask in here and then go hang yourself.

You want to know what size leveling kit you need to fit a certain size tire and/or wheel combo, ask in here.

So post up the questions! BUT try and do a lil searching and reading before you do. It might have already been said.:shake::shake:


Use this format if you would be so kind:

Lift Specs:
Fender Measurements:
Wheel Choice:
Tire Size:
Rubbing yes/no:


Thanks!
 
Last edited by a moderator:

Dan

Not Banned from GMFS
Mar 23, 2012
674
2
18
31
Columbia, SC
I guess I'll start this out

RCX 2" level
Dont know specific height measurements
18" Z71 wheels
Firestone Destination A/T 275/65
0 rubbing

IMG_0640.jpg

IMG_0639.jpg


and Bryant helping to put it on :trolldance2:
IMG_0621.jpg
 

beastmode

New Member
Mar 24, 2012
85
0
0
Might as well throw some up of my old truck leveled.

GM 20" assy wheels
295/55 Nitto Trails
2.5" Top Gun leveling kit

BeastmodeSilvy7.jpg

BeastmodeSilvy6.jpg

BeastmodeSilvy5.jpg

BeastmodeSilvy4.jpg

100_2344.jpg

100_2270.jpg

100_2268.jpg
 

Z_4_life

New Member
Mar 27, 2012
7
0
0
36
2.5" Total Performance leveling kit (gained 3 1/4")
2" NBS Factory block (99.5-07 classic 1500 4x4 block)
285/70/17 Hankook Dynapro M/T
No rubbing
41" front
39 1/2 rear
toyota005.jpg


Traded those for a set of machined OEM 20" wheels
yelleryota032.jpg


Then a set of 305/55/20 Dick Cepek Mud Country tires
yelleryota078.jpg

DSC_0994.jpg

DSC_0998.jpg
 

Z_4_life

New Member
Mar 27, 2012
7
0
0
36
Then go a set of Weld Cheyenne's....
DSC_1370.jpg


Then installed a 3.5" Skyjacker lift, truck rides much better now
Front 41 1/2"
Rear 39 1/2"
DSC_1290.jpg

DSC_1442.jpg

DSC_1445.jpg

DSC_1448.jpg

DSC_1401.jpg

DSC_1394.jpg
 

BOO5TED

Resident Smartass
Jan 7, 2011
20,163
11
38
ATL
4" CST spindles, 2" blocks, 295/55-20 Trail Grapplers, 20x8.5 Weld Cheyennes. No rubbing.

5674720578_0f5af225d7_b.jpg


5593297701_4f6964bdaa_b.jpg


6207844076_0d0e80b946_b.jpg



CST spindles = Stock track width too.

6467157841_b23bb285eb_b.jpg
 

Bootstrap

:nosewhat:
Feb 8, 2012
2,137
0
36
OKC
04' ECSB Sierra 4x4. Has 6" RCX NTD and 35's on 20x9 with 0 offset slight rub @ full lock. Can a guy fit 37's on same rims with a 2 or 3" bL w/o much trouble?
 

GCncsuHD

▓▓▓▓▓▓▓▓▓▓▓▓▓▓
Mar 8, 2011
428
4
0
Salisbury, NC
01 ECSB 2500HD 8" Fabtech, no crank (jounce bumpers sitting on LCAs), 38x15.5x20 on 20x10 with 5.5" backspacing. No rubbing.
DSCN3287.jpg

Same as above, 37x14x20 on 20x10 4.5" backspacing, no rubbing.
DSCN1286.jpg

03 CCLB 3500 2wd 2" crank to level, stock rear, true 35x12.50x17 on 17x8.5 w/ 5.625" backspacing. Slight rubbing, bumper raise and inner fender massaging took care of that.
DSCN2061.jpg

Same setup, no rubbing at all with smaller measuring 315/70R17s
DSCN3019.jpg

01 ECSB 2500HD 2" crank, 285/75R16 on 16x8 4.5" backspacing, shaved 1/4" off valance
CID__03-08-06_0730.jpg

07 CCSB 2500HD 3" crank, 2" block 295/75R16 on 17x8.5 5.625" backspacing, no rubbing
DSCN1245.jpg

Same as above, 275/65R20 on 20x9 4.5" backspacing, no rubbing
DSCN1299.jpg

07 CCLB 3500 cranked to the sky, 2" rear block, 305/55R20 on 20x9 4.5" backspacing. Trimmed valance, massaged inner fender.
DSCN2993.jpg
 

Mike

Banned from GMFS
Mar 20, 2011
420
2
0
Indiana
12" on a NNBS 1500 2wd/4wd will clear 38x15.50s on x12s with ever so slight rubbing at full lock

15" on a NNBS 1500 2wd/4wd with clear 38x15.50s on x14s with NO rubbing
 

Skylerlt

New Member
Mar 28, 2012
51
0
0
2.5" Top Gun Customz
20" Tahoe's
305/55-20 Terra's
back of front wheel wells "clearanced" about an inch
no rubbing
40" Front 39.75" rear

_IMG_1330.jpg


_IMG_1334.jpg


_IMG_1339.jpg
 

GreyGhostz71

Jimmy Skrait Perrps
Mar 27, 2012
2,281
13
38
That looks amazing^^^ only thing I would do is put some mud grips on it


Sent from my iPhone using Tapatalk
 

cknox121

New Member
Mar 27, 2012
625
0
0
Right now
2001 ecsb
Almost level, tad bit I rake
18x9
33 1250
Run on drivers side just a tad only when off road and in reverse an full lock.

Want either some gmc 20's with 33x1250
Or some predators 20x10 with 33x1250
Pretty sure I can fit the 20's and 33 with our rubbing, yes? No?

What about predators??


Sent from my iPhone
 

Huck

BIIIIG SQRBDY GUY
Jan 27, 2011
12,335
1,389
113
Gainesville, Ga
05 Z71 ECSB
Full RC Level kit. Actually got ~3" from it. .75-1" cali. Cranked till there's about 1/8" between UCA and droopstops. **just noticed, it looks raked here. It's not, it's just the ground
295/70/17 Trail Grapps. Had to cut bolt in pass fenderwell and trim the back corners off the droopstops on both sides
truckpics009.jpg


Same setup as above but with 285/70/17 Maxxis Bravo A/Ts and stock rear block. ~3" of cali :rofl2: No rubbing whatsoever here
phone086.jpg


Stock keys cranked all the way up, stock block. 285/70/17 Maxxis A/Ts. No rubbage
offroad372010003.jpg