4wd lowering FAQ

Read that wrong lol. Honestly, 99-06 2500 keys should all be the same, if you're paranoid about it, stick within 00-03 keys, but I bet if you cross reference the part numbers over the years they haven't changed.

As far as the rear, a 2" drop shackle and rear block delete should net you ~ 2" of rear drop. Have you been under the truck? Check for that block, and measure it. Should be just about 2"
 
Yes I did get under there and measure and it was just a hair under 2 inches. I know that lots of of guys are slamming their 4wds but I don't want slammed unless it's bagged lol. I want to put 24's on it and have low but still functional. Or find a set of stock 22s with tires. The black ones on the new burbs look really ice.


Sent from my iPhone using Tapatalk
 
Last edited:
My 4x4 isn't slammed :shrug: lol.

19577167_10155398933123608_8634549756102922479_o.jpg


I'm running a 2/4 drop, DJM 2" drop front control arms, and a 3" drop shackle with the rear block removed. They're only about 1" on the K2xx trucks, BUT, there's enough room between the hanger and bottom of the bed for a 3" shackle.
 
  • Like
Reactions: jiggie
Looks good! Would have never guessed it was lowered at all.


Sent from my iPhone using Tapatalk