Important!: 99 Yukon

dennisy1992

New member
Mar 17, 2018
4
0
0
31
My power door locks, power seats, and dome light won't work I checked the relay in the door jam and it's a 30 amp, it's constantly really hot, I put in a new one and it got really hot within minutes. Is there a short somewhere and if so where to find it? I checked the wires under the power seats none are broken or smashed. Please help.

Sent from my Z982 using Tapatalk
 
Check the all the wiring and connections. Start with the seats since they are knrown to have issues. It sounds like something is shorting out somewhere, do you have heated seats as well?
 
Find the fuses for each individual circuit and pull them, add them one at a time and let it sit for a little while before adding the next back in, when the relay starts getting hot you can at least figure out what circuit has an issue.
 
Check the all the wiring and connections. Start with the seats since they are knrown to have issues. It sounds like something is shorting out somewhere, do you have heated seats as well?
Yea I do have heated seats also

Sent from my Z982 using Tapatalk
 
Find the fuses for each individual circuit and pull them, add them one at a time and let it sit for a little while before adding the next back in, when the relay starts getting hot you can at least figure out what circuit has an issue.
Definitely will give it a shot

Sent from my Z982 using Tapatalk
 
Guessing you haven't figured out yet since there has been no reply. I thought I might offer something else to look at. Look at the wiring harness between the door jam. Sometimes the action of working the door and some age on the vehicle causes the wiring to break.