Huck’s 1985 C10

Is it in yet?


:cheeky:

Technically.....

3bced3639d6365583a5339e10db00af2.jpg





Sent from my iPhone using Tapatalk Pro
 
Ok, finally got it unloaded at my buddy’s shop with his tractor. They’ve only got 104k miles on them. I paid $3k. Was hoping to get something a little cheaper, but this was the lowest mile, cleanest thing I could find and it’s from a guy I trust. It’s out of his personal stash, he says he saves all of the aluminum 5.3s for his own builds.

-06 LH6 all aluminum 5.3. Basically an L33 with a goofy oil pan for an AWD axle to go through.
-799 heads
-DOD/AFM so gotta get rid of that
-4L65E

-I’ll need to swap to the truck oil pan, got GM PN# for the whole kit with pickup/dipstick/etc already
-Looking at the Sloppy Stage 2, BTR Stage 4 or an equivalent TSP cam
-Circle D 3000 stall converter
-Gotta decide PSI swap harness+stock computer+tuning or Holley stand alone setup

6941343ae17a1d63911f4826f9a259dd.jpg

6a31fe43aaa409e88febf484edd6b08c.jpg

066c6fc1255c6d17ccfbddf33f54d578.jpg

071f613c68b46a5a465d609f99832d97.jpg



Sent from my iPhone using Tapatalk Pro
 
Last edited:
  • Like
Reactions: sharris223
sweet deal if you plan on driving it a ton. im old school nasty small block person myself, but i also hate wiring.

Yeah I plan on driving the shit out of it so hoping to see some decent fuel economy. Buddy has basically the same setup and gets 20+ on the hwy.

Not to mention small block parts are still outrageous. By the time I built an equivalent 350, I’d be 3/4 of the way to an LS swap and get worse fuel mileage. Plus I love the way LS’ sound. Gonna do LTs and 3” pipe with an X and some Borla or Magnaflow mufflers. Should scream pretty good


Sent from my iPhone using Tapatalk Pro
 
Yeah I plan on driving the shit out of it so hoping to see some decent fuel economy. Buddy has basically the same setup and gets 20+ on the hwy.

Not to mention small block parts are still outrageous. By the time I built an equivalent 350, I’d be 3/4 of the way to an LS swap and get worse fuel mileage. Plus I love the way LS’ sound. Gonna do LTs and 3” pipe with an X and some Borla or Magnaflow mufflers. Should scream pretty good


Sent from my iPhone using Tapatalk Pro
depends on skills, i have a 600hp small block that has around 3k in it lol. but i also have parts and stuff laying around.

i have a good set of aluminum heads for sale :wink:
 
depends on skills, i have a 600hp small block that has around 3k in it lol. but i also have parts and stuff laying around.

i have a good set of aluminum heads for sale :wink:

Yeah, I don’t have anything laying around and everybody I know has LS stuff.

You can keep those ancient paper weights


Sent from my iPhone using Tapatalk Pro
 
  • Like
Reactions: SamCarroll
Haha oh I know. Small blocks can be made badass. But it’s definitely more expensive/harder to do than an LS. Would rock a rowdy small block fo free though :hinthint:


Sent from my iPhone using Tapatalk Pro
 
Speed Engineering 1 1 3/4” long tube headers, MLS gaskets, bolts and plug wires have been ordered and shipped


Sent from my iPhone using Tapatalk Pro
 
:bananadance:

You'll be pleased with the headers. I'm so damn happy with mine now that the leaks are sealed.
 
  • Like
Reactions: Huck
:bananadance:

You'll be pleased with the headers. I'm so damn happy with mine now that the leaks are sealed.

Heard a cammed single cab 99-02 at lunch. I’m so damn excited. I’ve gotta check and see what crank sensor I have so I can order the correct harness. About to pull the trigger on the cam/DOD delete too. Thinking I’m gonna go with the BTR stage 4 truck cam


Sent from my iPhone using Tapatalk Pro
 
  • Like
Reactions: sharris223
Heard a cammed single cab 99-02 at lunch. I’m so damn excited. I’ve gotta check and see what crank sensor I have so I can order the correct harness. About to pull the trigger on the cam/DOD delete too. Thinking I’m gonna go with the BTR stage 4 truck cam


Sent from my iPhone using Tapatalk Pro

Wish I was making the money that I do, but south of the border. The premium we pay to build shit up here is unreal.
 
  • Like
Reactions: sharris223 and Huck
Wish I was making the money that I do, but south of the border. The premium we pay to build shit up here is unreal.

Yeah, we hear that all the time from our Canuck customers. Move on down to Jawja! You won’t need a beater or snow tarz!


Sent from my iPhone using Tapatalk Pro
 
When researching some good, old school white letters to throw on the rallies, I found this truck, running the tire setup I was leaning toward. 245/60/15 and 295/50/15s. I’ll be cutting my springs some more for sure. This stance is

8efedff68b99181b45eb1117e1913cf3.jpg

a16f894900ee2db2b8f80fa7e751697e.jpg

c5718fb62a1c4ec50f702bc80d71b1f5.jpg



Sent from my iPhone using Tapatalk Pro
 
  • Like
Reactions: sharris223
Welp, the little 305 is dying a slow death. After a new carb, plugs, distributor and some tuning, she’s been running great. I’ve literally been dailying it. 75mph on the way to work, no sweat.

Last Friday, out of the blue, it starts running like absolute shit. Spitting and acting like she’s got a vacuum leak. None to be found, thought maybe I got some bad gas. I put some premium in and some B12 Chemtool. It helped a little, went back to 87 and runs like dog shit again.

Checked for vacuum leaks again, nothing. Carb didn’t just fall out of adjustment. Timing is correct, cap and rotor look fine. Start pulling plugs, 5 looks a little sooty, 6 is covered in a light mist of oil. Ok, not a surprise at this age. Do a compression test and 5 is down to 110, 6 is about 95. All the others are 140-150.

Dad was helping me, we figure my lead foot burned a couple valves in the ole gal lol. Oh well, I’ll drive her to the c10 meet Saturday and then park it at my buddy’s shop until I’m ready to do the swap.


Sent from my iPhone using Tapatalk Pro