My VHT Smoking Tails Experience

Status
Not open for further replies.
If you want them tinted make sure and actually have a painter put a nice coat on them,fuck vht

Very much truth. VHT will look hazy and ricy if not done in a professional manner, which means scuffing, adhesion promoter, several coats of vht, buffing, clearing, buffing - just to be short.
 
Yea, don't do it.

Very much truth. VHT will look hazy and ricy if not done in a professional manner, which means scuffing, adhesion promoter, several coats of vht, buffing, clearing, buffing - just to be short.
If you must, this is the best route, VHT alone looks horrible, wet sanding, clearing, wetsanding, and buffing will make it look right. But once you go through that, you might as well have just had them professionally tinted using a clear/black tint mix.
 
don't do it. was mistake on le Camaro. looked good for about a minute

my window look better than my tails :eek:kay:

aefd66f1-c308-82cc.jpg

aefd66f1-c347-de44.jpg

aefd66f1-c388-a27d.jpg


even the side markers are weak now
aefd66f1-c3cc-200c.jpg
 
Big no to the VHT, when I do them I use bc/cc. Strait black, not metallics, don't over reduce, light coats. Then clear coat. Done.
 
Status
Not open for further replies.