The only way you will be able to run the 16s is if you run the upper and lower arms..if you do spindles you have to run 17+ spindles for them to clear the cv axles
Djm 4" lca's up front if you can swing them, if not 2" mcgaughys 17+ spindles and keys
mcgaughys flip/bolt-in notch in the rear
Your choice of shocks..
/thread
I don't think DJM ever made a torsion bar LCA that was rated at 4" of drop...
So are you raising back up?
pulling the block will work, stock shocks will work.
the ride quality will stay the same.
but it will not be lower than the front.
get shackles also and shock extends or aftermarket shocks. i have 3" djm lcas.buy them and do a 4/6 right from the beginning. cause youll wanna go lower, promise ya.
Remove blocks, get drop shackles, get 2wd stock shocks, be happy.