Bagged NBS Thread (99-07c) Pics & Discussion 123123

Tubing
My guy loves his tubing bender
like this
76431_110080122393200_5846027_n.jpg
228345_153709451363600_8332196_n.jpg
420726_273499832717894_1605955438_n.jpg


But we are keeping it simple with mine
He just finished 4.5in BD on a'06 CCsb on 315/35/24s ready for 28s
 
Thats what I was telling Joey this morning. Usually theres a crossmember or something connecting each side of the wishbone together.
 
Are you gonna build a cover for inside the bed? Or just leave the notch and everything open?
 
The bed will be showing a nice cut out of the wishbone,notch and tubing
A notch cover will be built to cover and pull off at shows
The tank will be hidden,but coming off the tubbing work will be dual 480s floating at 45s ,along with all the accuair vu4 and speedbox mounted floating in the center. Just showing it off ;),well the Viairs are a whoopie shit but the accuair will be nice.Wish i had some AZ's i found a truck on the web set up like this and really liked the idea
We are going to cut a hole straight through the notch and weld a solid peice of pipe through it to run all my air lines and wires.
It will have tubs in the rear and the bed will get linex asap when its done
Removed parking break and bending some new low profile brake lines,grinding ever thing off the axle like stock shock mounts,those bump stop plates,just to clean things up
 
Guys hook a brother up on some Heims for my MMW full kit. Sucks they dont come :/
My guy bagging my truck told me we had to wait and see because some are different then others,idk
Any input would like to have them here before the kit arrives
 
Peyton676 said:
Guys hook a brother up on some Heims for my MMW full kit. Sucks they dont come :/
My guy bagging my truck told me we had to wait and see because some are different then others,idk
Any input would like to have them here before the kit arrives
Click to expand...

here's the heims(2 of these)
Heim Joint 5/8" LH | Heim Joints | Suspension | Summit Machine

you'll need 4 of these
Heim Spacer 5/8" | Heim Spacers | Suspension | Summit Machine

you'll have to cut the 1" spacer to go on the heims out of tubing.

7-1.jpg


the sleeve for the tierods will have to be drilled and tapped, because they dont make a tube adapter with the thread count on the inner tie rods. At least at the time I did mine. I forgot what the thread count is but you can easily get that.

just remember to get some jam nuts for the hiem joints.
 
Wow this is cheap.So just have someone machine me two sleeves
What size bolt is that running through the whole thing?
 
Peyton676 said:
Wow this is cheap.So just have someone machine me two sleeves
What size bolt is that running through the whole thing?
Click to expand...

5/8". you'll have to drill the spindle out to be able to use this size bolt. you can either have it machined or get some cold roll steel and drill and tap each half of it. thats all I did
5-1.jpg
 
Anyone lookong for 3 links
Nfamas has sale on there 3 link wishbone,everything you need tabs,notch,bushings,bolts,everything for 575
SC20120710-091328.png
 
to anyone wanting Hiem steering adapters, I'm going to be making them upon request. They will be $75 shipped anywhere in the connecting 48. if you want heims, misalignment spacers, bolt and all. It will be $175 shipped anywhere in the connecting 48. will have some pics later this week when I get done making Peyton's.
 
You must log in or register to reply here.
Top