Bagged NBS Thread (99-07c) Pics & Discussion

Tukn4s said:
Yeah the camber will be alright but you usually get more positive camber with the 2505 spindle than other spindles throughout the travel if the suspension.

I wish you lived close to me. I have had an idea I wanted to try with the 2505 spindle.
Click to expand...

whats that?
 
Adjusted said:
whats that?
Click to expand...
putting the upper ball joint through the top of the spindle like stock spindles but leaving the lower ball joint how Belltech designed it. pretty much doing a smaller dimensioned version of my trucks front suspension. the only thing I don't know is if the distance will be right or not for the front suspension geometry.
 
Last edited:
Well everything is ordered for my truck,besides the MMW and Hydroboost
Calling monday down to MMW to talk probally wont be able to order until next week
I made up my mind and we are 3 linking it
Accuair non elevel
444's
5gallon
All the other stuff
Starting on the rear in 2 weeks or so
I wont be bagging it as i dont have time as im lucky if i have a weekend off right now
But will keep yall updated on pictures and build
 
We are going to see how the MMW kit lays on stock spindels and then we will go from there and see if i need to buy some aftermarket,brett told me i should be fine just laying 24s
All i need is front kit,hydro,heims,Also buying the KP crossmember,he told me to hold h.o that he might just raise it himself
 
I will be running accuair as well when I finish getting funds together...cant wait to see how it turns out on yours
 
cant wait to actually use my accuair for something other than airing my truck up to loom wire and attempt to fix its brakes.
 
You must log in or register to reply here.
Top