Well I can see you new at this, completely wrong plate to do this. But, there should be a couple bolts holding it down.
roundsy's 05 Hoe Build
- Thread starter roundsy
- Start date
Well I can see you new at this, completely wrong plate to do this. But, there should be a couple bolts holding it down.
Just look on their website. But search for a 2006 Suburban with LTZ trim package.
It's about in the $200 range with shipping.
LMC Truck sells them also.
I lucked out and found mine on egay for $120 shipped.
Rockauto also has the round LTZ fog lights for pretty cheap.
Wrong place pal. But u gotta remove oil filler cap and it just pops off. No bolts.
Thanks, I was browsing like crazy for it last night but had no luck. I'm going to try again now and yeah the lights were decent for $41. It was nice to see most of the stuff I wanted (primed grille, bumpers, bumper cap and fogs) could ship from Canada too
Last edited:
Still couldn't find the valance on rockauto but did find it on LMC so I'll probably pull the trigger on it and some fogs in the next little while. Anyways, I got the hoe home yesterday:
Also started ordering some parts:
Also started ordering some parts:
Got the hoe put on the road this morning and messed around with a few things. I pulled one of the chrome flares off and found that the paint was bubbled underneath so the chrome ones are going to stay for now. I'm going to get the rust fixed, paint blended and then mount some OEM flares (painted eventually).
I cranked the keys and mounted my old wheel setup off of the RCSB, 275/60/20 cooper zeon ltz. No issues with rubbing so I'll probably just rock these until they are worn out before I go any higher.
Measurements: F-35.25" R-36.75"
Measurements: F-38.25" R-38.25"
I cranked the keys and mounted my old wheel setup off of the RCSB, 275/60/20 cooper zeon ltz. No issues with rubbing so I'll probably just rock these until they are worn out before I go any higher.
Measurements: F-35.25" R-36.75"
Measurements: F-38.25" R-38.25"
Last edited:
Few updates:
Started debadging tonight but ran out of daylight and fishing line before I could finish the 2 door emblems
Pulled the chrome trim pieces off to colormatch until the OEM flares show up. Got tired of the chrome for the time being but NAPA mixed my paint wrong so they may just end up plasti-dipped. Also found that the passenger rear was the only spot that had bubbled paint under so that's was a nice surprise.
Randomly found a painted lift gate handle on egay so I grabbed that as well since the price was right. Bought a set of new fogs too since they were on the cheap and the z71 valance isn't happening until the spring unless I find a deal on one before then.
Started debadging tonight but ran out of daylight and fishing line before I could finish the 2 door emblems
Pulled the chrome trim pieces off to colormatch until the OEM flares show up. Got tired of the chrome for the time being but NAPA mixed my paint wrong so they may just end up plasti-dipped. Also found that the passenger rear was the only spot that had bubbled paint under so that's was a nice surprise.
Randomly found a painted lift gate handle on egay so I grabbed that as well since the price was right. Bought a set of new fogs too since they were on the cheap and the z71 valance isn't happening until the spring unless I find a deal on one before then.
Starting to look good. Its amazing how the wheels and tires made such a huge difference in the look
It's got a long way to go before I'll be happy with it but it'll get there eventually.
Also contemplating nnbs mirrors on it. Seen it done a few times and might be neat...thoughts? (RCSB will be getting painted tows so I'll already have the mirrors)
Also contemplating nnbs mirrors on it. Seen it done a few times and might be neat...thoughts? (RCSB will be getting painted tows so I'll already have the mirrors)
OEM flares ordered. They will be painted next spring along with new handles, mirror caps, grille, bumpers and the upper bumper cap.
No more steps as well
Going to see if my 20x9s and Toyos off of the RCSB fit since I want 20x12s for it anyways. Hopefully I'll have time to do it tonight before I play hockey.
No more steps as well
Going to see if my 20x9s and Toyos off of the RCSB fit since I want 20x12s for it anyways. Hopefully I'll have time to do it tonight before I play hockey.
Last edited:
Threw the BMF/305s on the hoe last night to see how it would look. They cleared fine except in reverse at full lock. Ended up putting the gmc 20s back on because I liked how they looked more. When it's fully cm'd and has ford keys next spring I'll mount them again but there's too much going on right now with all the black trim pieces.
The Rockauto part number for the black Z71 Valance is GM1092186
Price is $98 but shipping to my zip is $70, so they will rape you shipping it to Canada.
More Information for VARIOUS MFR GM1092186
Price is $98 but shipping to my zip is $70, so they will rape you shipping it to Canada.
More Information for VARIOUS MFR GM1092186
Thanks, that's cheaper than the LMC price by a good amount. Lists at $110 CDN and can ship from a Canadian warehouse to my house for another $63 CDN. Won't be terrible when all the shipping gets combined when I order it with the rest of the components I want.
Last edited: